Learn how to sew on badges manually or by machine
When you wish to spice up a garment, accessory, luggage piece or even hats you could sew on badges to obtain the new look easily Dogbadge.com/labradors/. Badges or patches when placed strategically can immediately change the look of a garment or accessory and take it from boring to spunky in just a few minutes. If you’ve got children and they keep earning badges of merit you wish to sew them on. However, as intimidating as it might sound, sewing on badges isn’t very difficult once you know the way to get it done.
To start this approach to sewing on a badge, start with placing the badge on the place where you want it to be. Now secure the badge well with a few pins so it stays in place and doesn’t shift when you are sewing it on. Now if you happen to be putting the patch on a garment, you have to fix the patch and after that try the garment on to be certain that the patch or the badge looks right in the place. If the patch needs a little readjustment it can be done at this stage easily.
Now thread the needle ensuring that the thread you’re using isn’t very long. Keep your thread in a length of approximately 18inches for easy maneuvering. If the thread is too long then you might get bothered by knots. When you’ve the thread ready make a knot at the end of the thread. It is possible to thread a needle yourself by holding the non knotted end between your forefinger and thumb after which passing it in the eye of your needle. You could also get the aid of a needle threader if you find threading a needle this way difficult.
Pass the needle in the badge as well as the fabric being sure that the knot is on the wrong side of the patch. Leave a space of 1/8th of an inch from which you started stitching keeping this distance from the last stitch all of the time. Continue stitching round the entire perimeter of the badge until you have finished stitching it all the way through. Now knot the thread on the underside of the patch by looping your thread by using a single stitch. Pull the thread strongly to secure the knot after which you can cut-off any excess thread which is left. Lastly remove the excess safety pins that you were using to secure the patch in position.
You may as well sew on badges with the assistance of a sewing machine if you don’t wish to accomplish the same by hand. Pick a thread that matched the color of your patch and then tread your machine. You may as well select a contrasting color with regards to the look that you want to give your badge. Once this is successfully done you have to start sewing you badge. Makes use of the top of the badge as your starting position and sew all along the edge of your badge utilizing the regular stitch mode ending in your kick off point. Once done, cut the extra thread that connects the badge to the machine and your garment is ready to be utilized with the badge.